[. . . ] Indd 1-2 <CRD4729-A> 2 2013/01/31 12:25:43 English Parts supplied Connecting the in-vehicle product USB/iPod input RGB input Notes: •Secure all wiring with cable clamps or electrical tape. €¢Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, parking brake and seat rails. [. . . ] €¢Use only the cables included in this connectivity kit to ensure proper connection. €¢Do not use the cables included in this connectivity kit for other models. Products) (sold separately) iPod/iPhone (sold separately) Important safeguards This manual explains how to connect the in-vehicle product via the connectivity kit. For details of the operation of the connected product, refer to another manual. €¢Read this manual fully and carefully before installing this product. €¢Pay close attention to all warnings in this manual and follow the instructions carefully. €¢Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems of safety features, including airbags, hazard lamp buttons, or (iii) impair the driver’s ability to safely operate the vehicle. In some cases, it may not be possible to install this product because of the vehicle type or the shape of the vehicle interior. €¢Make sure that the cables and wires are routed and secured so they will not interfere with or become caught in any of the vehicle’s moving parts, especially the steering wheel, shift lever, parking brake, sliding seat tracks, doors, or any of the vehicle’s controls. Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. [. . . ] €¢ The positions of the RGB input and USB/iPod input differ depending on the in-vehicle product. For details of the terminals’ positions, refer to the manual of each product. [. . . ]